GO

1600UT System™2 Curtain Wall

CAD detail and Guide Specification downloads for Kawneer and Traco.

CAD Files
Click to expand / collapse each section. Click link on right to download file.
[+] 1600UT System™2 (1" and 1/4 " Infill )
[ZIP]
[+] 6" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with F-Perimeter
[DWG][DXF]
Typical Details with Thermal Pocket Filler
[DWG][DXF]
90 deg, 135 deg Corner Details
[DWG][DXF]
1600 GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Sam-II Concealed Closer or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[ZIP]
[+] 7-1/2" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with F-Perimeter
[DWG][DXF]
Typical Details with Thermal Pocket Filler
[DWG][DXF]
90 deg, 135 deg Corner Details
[DWG][DXF]
1600 GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Sam-II Concealed Closer or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[ZIP]
[+] 10-1/2" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with F-Perimeter
[DWG][DXF]
Typical Details with Thermal Pocket Filler
[DWG][DXF]
1600 GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Closer
[DWG][DXF]
Offset Pivot/Butt Hung with Sam-II Concealed Closer or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[+]
[+] 1600UT System™2 (1-3/4" and 1" Infill)
[ZIP]
[+] 6-3/4" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with F-Perimeter
[DWG][DXF]
Typical Details with Thermal Pocket Filler
[DWG][DXF]
90 deg, 135 deg Corner Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Sam-II Concealed Closer or Surface
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[ZIP]
[+] 8-1/4" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with F-Perimeter
[DWG][DXF]
Typical Details with Thermal Pocket Filler
[DWG][DXF]
90 deg, 135 deg Corner Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Sam-II Concealed Closer or Surface closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[ZIP]
[+] 11-1/4" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with F-Perimeter
[DWG][DXF]
Typical Details with Thermal Pocket Filler
[DWG][DXF]
Entrance Details - Center Hung with Concealed Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Sam-II Concealed Closer or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[+]
[ZIP]
[+] Miscellaneous Details
[DWG][DXF]
Backpan Details - 1" Infill
[DWG][DXF]
Backpan Details - 1-3/4" Infill
[DWG][DXF]
Optional Framing Details - 1" & 1-3/4 Infill
[DWG][DXF]
Stool Trim Options - 1" & 1-3/4" Infill

Spec Files
[ZIP]
[+] Specifications
[PDF][DOC]
1600UT Curtain Wall System
[PDF][DOC]
1600UT Curtain Wall System (French)