Home

Kawneer Global  / kawneer direct /  English | Français

CAD & Spec Download

CAD detail and Guide Specification downloads for Kawneer and Traco.

Cad Files

[ZIP]
1/4" Infill - 5-1/4" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with "F-Perimeter"
[DWG][DXF]
Typical Details with Perimeter Mullions
[DWG][DXF]
90° & 135° Corner Details
[DWG][DXF]
Window and GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Overhead Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Single Acting COC or Surface Closer
[DWG][DXF]
Typical Anchoring Details
[DWG][DXF]
Typical splice Details
[ZIP]
1" Infill - 6" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with "F-Perimeter"
[DWG][DXF]
Typical Details with Perimeter Mullions
[DWG][DXF]
90°, 135° and Splayed Corner Details
[DWG][DXF]
Window and GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Overhead Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Single Acting COC or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with LCN 2030/5030 Concealed Closer or Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[ZIP]
1/4" Infill - 6-3/4" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with "F-Perimeter"
[DWG][DXF]
Typical Details with Perimeter Mullions
[DWG][DXF]
90° and 135° Corner Details
[DWG][DXF]
Window and GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Overhead Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Single Acting COC or Surface Closer
[DWG][DXF]
Typical Anchoring Details
[DWG][DXF]
Typical Splice Details
[ZIP]
1" Infill - 7-1/2" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with "F-Perimeter"
[DWG][DXF]
Typical Details with Perimeter Mullions
[DWG][DXF]
90° Corner Details
[DWG][DXF]
Window and GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Overhead Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Single Acting COC or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with LCN 2030/5030 Concealed Closer or Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical Splice Details
[ZIP]
1" Infill - 10-1/2" Frame Depth
[DWG][DXF]
Typical Details with Perimeter Pressure Plate
[DWG][DXF]
Typical Details with "F-Perimeter"
[DWG][DXF]
90° Corner Details
[DWG][DXF]
Window and GLASSvent Details
[DWG][DXF]
Entrance Details - Center Hung with Concealed Overhead Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with Single Acting COC or Surface Closer
[DWG][DXF]
Entrance Details - Offset Pivot/Butt Hung with LCN 2030/5030 Concealed Closer or Surface Closer
[DWG][DXF]
Typical Anchoring & Steel Reinforcing Details
[DWG][DXF]
Typical splice Details
[ZIP]
Impact Resistant Details
[DWG][DXF]
7-1/16" with 9/16" infill and 7-13/16" with 1-5/16" Infill (SMI - Single Span - Dry Glaze)
[DWG][DXF]
7-1/16" with 9/16" infill and 7-13/16" with 1-5/16" Infill (LMI - Single Span - Wet Glaze)
[DWG][DXF]
7-1/16" with 9/16" infill (SMI - Twin Span - Dry Glaze)
[DWG][DXF]
7-1/16" with 9/16" infill (LMI - Twin Span - Wet Glaze)
[DWG][DXF]
10-1/16" with 9/16" infill (SMI - Single Span - Dry Glaze)
[DWG][DXF]
10-1/16" with 9/16" infill (SMI - Single Span - Wet Glaze)
[ZIP]
Miscellaneous (Backpan, Stool Trims)
[DWG][DXF]
Backpan Details
[DWG][DXF]
Optional Framing Details
[DWG][DXF]
Stool Trim options
[DWG][DXF][ZIP]
Blast Resistant CAD Details
[DWG][DXF]
Details with REYNOBOND Panel

Spec Files

Specifications
1600 Wall System1 - English
1600 Wall System1 - French
top anchor