Additional Product Info / Documents

350/500 Heavy Wall™ IR Entrances

  • 3-1/2" (88.9mm) or 5" (127mm) sightline
  • 2" (50.8mm) depth
  • Non thermal performance
  • Blast mitigation, hurricane resistance
  • Moderate to high traffic application

Product Features

350/500 Heavy Wall™ IR Entrances have been tested not only to meet South Florida requirements set forth by the Florida Building Code (FBC) and the Level D requirements of ASTM E 1996, but the even more stringent Level E (Enhanced Facilities) requirements of ASTM E 1996.
Additionally the Entrances withstood the testing requirements of ASTM F 1642 for blast mitigation.
To resist both lever arm and torsion forces that constantly act upon any door, 350/500 Heavy Wall™ IR Entrance doors feature four Sigma deep penetration and fillet welds plus mechanical fastening at each corner. In addition to the standard two-year warranty covering every Kawneer door, each door corner for the 350/500 Heavy Wall™ Entrances comes with a limited lifetime warranty, good for the life of the door under normal-use operation.

Key Features Include:
  • 350 medium stile has 3-1/2" vertical stile, 3-1/2" top and 6-1/2" bottom rail
  • 500 wide stile has 5" vertical stile, 5" top and 6-1/2" bottom rail
  • Door is 2" deep
  • Door has 3/16" wall thickness
  • Welded corner construction
  • Single acting
  • Offset pivot, butt hinges or continuous geared hinge
  • Surface mounted or concealed closers
  • MS lock or exit device hardware
  • Architects Classic push-pulls
  • Square stops with interior silicone seal for 9/16" (14.3 mm) or 1" (25.4 mm) glazing infills
  • Adjustable astragal utilizing pile weathering with polymeric fin at meeting stiles
  • Polymeric bulb weatherstripping in door frames
  • Permanodic® anodized finishes in seven standard choices
  • Painted finishes in standard and custom choices
Optional Features
  • Numerous push/pull options
  • Paneline® exit device or Paneline® EL exit device
  • 3/16" heavy wall frame
  • Crossrails and 10" Bottom Rail
  • Square stops with 3M™ VHB™ Structural
  • Glazing Tape at interior for 9/16" (14.3 mm) or 1" (25.4 mm) glazing infill
Product Applications

  • 350/500 Heavy Wall IR provides added strength for schools, institutions, office buildings and other high traffic applications where codes require windborne debris or blast mitigating protection.

Edit / View All 
    top anchor