Kawneer’s Forced Entry Solutions delivers ASTM F3561-tested forced-entry resistance across coordinated storefront, entrance, and hardware systems. Designed for security-focused projects, it supports specification without compromising architectural performance, design flexibility, or aesthetics.
Applicable across education, healthcare, government, and other public-facing building types, this product portfolio was developed for projects where enhanced security must be integrated into complete entrance and storefront assemblies.
With validated configurations across framing, entrances, and hardware, this range provides a clearer path to specifying forced-entry resistance with greater confidence.
| System | Min. ASTM F3561 Level * |
|---|---|
| Trifab® Versaglaze® 451/451T (Dry Glaze) | 5 |
| Trifab® Versaglaze® 601T (Dry Glaze) | 4 |
| IR 521T Framing System (Wet or Dry Glaze) | 4 |
| System | Min. ASTM F3561 Level * |
|---|---|
| Kawneer 1686 CVR (Tape Glaze) | 2 |
| Kawneer 1686 CVR (Wet Glaze) | 5 |
| Von Duprin FER-99 RIM (Tape Glaze) | 2 |
| Von Duprin FER-99 RIM (Wet Glaze) | 3 |
| Sargent PE8800 RIM (Tape Glaze) | 2 |
| Sargent PE8800 RIM (Wet Glaze) | 3 |
* Performance ratings may vary depending on glazing type, hardware configuration, and test unit size. Counterintuitively, larger test units often achieve higher performance levels. While minimum ratings are shown here, higher-performing configurations have been validated and are available upon request.